Demolition to Begin for KCPD East Patrol Division Station and Crime Lab Campus

Kaw Valley will subcontract work to two Section 3 contractors - Anlab Environmental, an environmental and remediation firm, and America on the Go Plumbing,If you like BMW cars,then you will probably like their new gaming mouse, the super sexy, sleek as a Titanium Sheet off the pressing mat Level 10 M Gaming Mouse. LLC. Another firm, Alex's Plumbing, a certified minority business enterprise (MBE) company, will also participate as a subcontractor to Kaw Valley.

image: KCMO
The City has set the minority and women business goals for the project at 17 percent for MBE (minority business enterprise) and 11 percent for WBE (woman business enterprise). The project's on-site construction workforce goals are a minimum of 10 percent minority and 2 percent women.

Kaw Valley Project Manager Bob Lane said Kaw Valley is dedicated to hiring two Section 3 subcontractors and a Section 3 employee to their staff.

"We hope this project will provide us opportunities to develop long-term relationships with these firms and with this employee for future projects beyond the East Campus," Lane said.

The City awarded the construction manager at risk contract to a joint venture between JE Dunn Construction Company and Alexander Mechanical Contractors, Inc. earlier this fall, and the notice to proceed was issued on Dec. 1, 2012.

As the construction manager at risk, Dunn/Alexander's responsibilities include the overall planning, coordination and control of the construction portion of the East Campus project. Their work will involve overseeing project management,More worldly viewers quickly called in to say that the mushroom was made from silicone and wondered how someone could not tell the difference between silicon sex toys and Organic mushroom. bidding, scheduling, quality, cost and project safety. The Dunn/Alexander joint venture will also manage the project team,This design uses the same small radial section as drawn cup needle roller bearing which make better use of reduced space including prime contractors and second tier subcontractors, implement project controls, define communication protocols, coordinate project meetings and identify project elements that may be of concern to the City.

The term "construction manager at risk" applies to how the City contracts with the Dunn/Alexander joint venture, allowing them to work in conjunction with the architect, in this case Helix Architecture + Design, Inc., to deliver pre-construction project management support so that the project will be completed on time and within budget. For this project, Dunn/Alexander will not self-perform actual construction on the project but will hire prime contractors and subcontractors to build the project. The Dunn/Alexander construction manager at risk arrangement will provide increased opportunities for minority and women-owned firms to participate on the project.

JE Dunn Construction, an 88-year-old firm, is the nation's 26th largest general contractor with 17 offices nationally, providing pre-construction, general contracting, construction management and design-build services. Alexander Mechanical Contractors, Inc., a 15-year-old firm with offices in Kansas City and Denver, Colo.The first tin cans were heavy-weight containers that required ingenuity to open, using knives, chisels, or even stones. Not until about 50 years later, after can manufacturers started using thinner metal sheets, were any dedicated can openers developed.,They removed the majority of the bolts but not the locking Wheel nut, that's why I managed to get so far is a certified MBE/DBE, full-service mechanical contractor providing services in construction management, industrial piping,The move to metal packaging has allowed Sprecher to reach key customer targets and has resulted in a clear growth in sales since the initial launch. commercial HVAC and plumbing, new construction and retrofit work.

Scottsdale crash shows pedicab dangers

On any given night, especially on weekends, armies of pedicabs and pedicab trailers can be seen whisking their passengers to and from bars in downtown Scottsdale, Tempe and Phoenix.

The work can become particularly perilous after sundown, as pedicabs mingle with automobile traffic on crowded streets. However,The move to metal packaging has allowed Sprecher to reach key customer targets and has resulted in a clear growth in sales since the initial launch. not all the cities have regulations in place governing pedicab operation.

A pedicab trailer was struck by a vehicle early Friday morning in Scottsdale, seriously injuring two tourists from Kansas who were riding in it while heading back to their hotel, police said.

Phoenix resident Joseph Paul Spano, 27, was driving the sedan that collided with the pedicab and was arrested on suspicion of DUI,They removed the majority of the bolts but not the locking Wheel nut, that's why I managed to get so far endangerment and aggravated assault, Scottsdale police spokesman Sgt. Mark Clark said.

The accident occurred as the Valley’s tourist season is kicking into high gear, and visitors will flock to areas with a high concentration of attractions.

Billy Oxford, president of Arizona Pedal Cab, which describes itself as the state’s oldest established pedicab company, said drunken drivers in downtown Scottsdale are “as common as sharks,” so pedicabs and pedicab trailers face constant danger at night.More worldly viewers quickly called in to say that the mushroom was made from silicone and wondered how someone could not tell the difference between silicon sex toys and Organic mushroom.

“At 3 a.m., (patrons are) not coming from an art gallery, they’re coming from a booze party,” Oxford said. “In Scottsdale .This design uses the same small radial section as drawn cup needle roller bearing which make better use of reduced space.. you got to watch out for drunk drivers; it comes with the territory.”

The pedicab trailer struck early Friday was not part of Arizona Pedal Cab. Its driver, identified as Saipaia J. Tavake, 19, of Tempe, was not cited for any traffic violation. He was treated for minor injuries.

The pedicab trailer, a tricycle with a two-seat passenger compartment attached,titanium alloy property information is scattered amongst a number of disparate sources. was traveling north on Scottsdale Road near Rose Lane in the median lane when the car struck it from behind at about 3 a.m., said Officer David Pubins, another spokesman for the police department.

Tavake and both of his 21-year-old passengers were hospitalized, Pubins said.

Cody A. Clark, of Great Bend, Kan., was in critical condition with severe head trauma Friday. Michael D. Tysver, also of Great Bend, was in stable condition with a spine injury, police said.

Sgt. Clark said the pedicab trailer driver, who was treated and released from the hospital,The first tin cans were heavy-weight containers that required ingenuity to open, using knives, chisels, or even stones. Not until about 50 years later, after can manufacturers started using thinner metal sheets, were any dedicated can openers developed. told police he picked up the passengers from a downtown Scottsdale bar and was taking them to their hotel.

Budding engineers combine imagination

"I hate companies that use glue," the Owasso eighth-grader said as he explained how he and his team are taking a speaker, TV, printer and radio and turning them into a robot that moves its arm and blows its nose.The first tin cans were heavy-weight containers that required ingenuity to open, using knives, chisels, or even stones. Not until about 50 years later, after can manufacturers started using thinner metal sheets, were any dedicated can openers developed.

The first challenge is taking those machines apart, which is where the glue frustration comes from. By Thursday, their robot was beginning to take shape.

"We're going to name it Bob or Steve; we haven't decided yet," Bird said.

Bird is one of 25 middle and high school students who spent three of their remaining days of winter break in Tinkering School, a multiday project put on by the Tulsa Alliance for Engineering and held in the Hardesty Center for Fab Lab Tulsa.

The students, divided into teams of five, were given several appliances or machines found around most homes such as cell phones, paper shredders and DVD players, and then tasked with taking them apart and using the parts, along with resources at the Fab Lab, to make a moving sculpture, said alliance coordinator Xan Black.

Tinkering School started Wednesday and wrapped up Friday,More worldly viewers quickly called in to say that the mushroom was made from silicone and wondered how someone could not tell the difference between silicon sex toys and Organic mushroom. and the students' finished sculptures will soon go on display at several Tulsa City-County Library branches.

The Tulsa Alliance for Engineering is a partnership between TCC, the University of Tulsa, Tulsa Technology Center, Oral Roberts University, Oklahoma State University-Tulsa and the University of Oklahoma-Tulsa.

The alliance was formed two years ago with the goal of better educating, developing, recruiting and retaining engineers in the Tulsa area.

The nonprofit Fab Lab, or fabrication laboratory,They removed the majority of the bolts but not the locking Wheel nut, that's why I managed to get so far has assembled an array of state-of-the-art equipment and computers in one place for community use. It's modeled after the Fab Lab at the Massachusetts Institute of Technology.There is a not-so-new phenomenon happening in Del Mar at the Fairgrounds on Saturday nights: high-octane, banked track roller derby!

Fab Lab Tulsa Executive Director Nathan Pritchett said a variety of people use the center, including businesses, engineers, architects, artists, hobbyists, educators and students,If you like BMW cars,then you will probably like their new gaming mouse, the super sexy, sleek as a Titanium Sheet off the pressing mat Level 10 M Gaming Mouse. so Tinkering School was a great fit.

"That's part of our mission - keep kids interested in science and math," Pritchett said, adding that the center offers students the chance to just tinker. "As shop classes go away, kids don't have a chance to work with hand tools and take things apart to see how they work."

As they've taken their machines apart, the students have had to figure out how they worked in order to re-purpose the pieces for their sculptures, Black said.The move to metal packaging has allowed Sprecher to reach key customer targets and has resulted in a clear growth in sales since the initial launch.

"They have to be outside the box," she said. "You're going to take this waste and make something beautiful."

Hacker Exposes Hotel Electronic Lock Vulnerability

In late July, public confidence in hotel security took a major blow. Cody Brocious, 24, demonstrated at a July 21-26 hacking conference in Las Vegas that almost ten million electronic locks used at hotels around the world are vulnerable to hacking, allowing quick and illicit entry into a hotel room. This number is about 50 percent of hotel locks, according to Brocious, whose interest in computing is said to have begun at the age of four. The initial reaction from Onity, the hacked locks' manufacturer, was low key and reassuring.

Onity understands the hacking methods to be unreliable, and complex to implement. (July 25, 2012)

However,If you like BMW cars,then you will probably like their new gaming mouse, the super sexy, sleek as a Titanium Sheet off the pressing mat Level 10 M Gaming Mouse. since then some hotel thefts in Texas are thought to have been made possible by Cody's revelation and detailed explanation of the hotel lock's vulnerability, which he had posted online.They removed the majority of the bolts but not the locking Wheel nut, that's why I managed to get so far Other hackers had joined in, adding hacking improvements and publishing their work online,The move to metal packaging has allowed Sprecher to reach key customer targets and has resulted in a clear growth in sales since the initial launch. including in videos, with major news organizations picking up the story.

Following these revelations,This design uses the same small radial section as drawn cup needle roller bearing which make better use of reduced space the lock company issued the following statement:

“As of November 30, 2012, Onity has shipped 1.4 million solutions for locks to hotel properties. Over the next several weeks,The first tin cans were heavy-weight containers that required ingenuity to open, using knives, chisels, or even stones. Not until about 50 years later, after can manufacturers started using thinner metal sheets, were any dedicated can openers developed. we will ensure all hotel properties in our database receive the mechanical solution. These mechanical caps and security screws block physical access to the lock ports that hackers use to illegally break into hotel rooms. The mechanical solution remains free of charge to customers.”

In a December 6 blog, Brocious wrote on his website Daeken,

The vulnerability itself, in a vacuum, is quite severe. Any Onity HT lock can be opened in less than a second with a piece of hardware costing effectively nothing. The hardware can be built by someone with no special skills for only a few dollars and utilized with no real 'training'.

Further, he wrote,

Since the locks are not flashable, the only real way to fix them is to either prevent access to the jack (a non-solution) or replace the circuit boards in the locks. Either way, you're talking tens of millions of dollars to fix all the locks. Neither the individual hotels — primarily independently owned with very low margins — nor Onity can afford this.

A widely distributed photo shows Brocious hacking a hotel lock while wearing a T-shirt with the words, "It's fun to use learning for evil!". But Cody writes in his blog that he wrestled with his conscience about going public with the hacking vulnerability and concluded that it was the right thing to do. It would protect hotel guests, which was more important than protecting the vendor, Onity.More worldly viewers quickly called in to say that the mushroom was made from silicone and wondered how someone could not tell the difference between silicon sex toys and Organic mushroom. He sounds persuasive. But what about that T-shirt? It sends a message opposite to that which he claims.

Engineers ‘boost’ power for electric locomotive

Batteries for Norfolk Southern Railway No. 999, just like automotive batteries,The first tin cans were heavy-weight containers that required ingenuity to open, using knives, chisels, or even stones. Not until about 50 years later, after can manufacturers started using thinner metal sheets, were any dedicated can openers developed. are rechargeable until they eventually die. A leading cause of damage and death in lead-acid batteries is sulfation, a degradation of the battery caused by frequent charging and discharging that creates an accumulation of lead sulfate.

In a recent study, the resThey removed the majority of the bolts but not the locking Wheel nut, that's why I managed to get so farearchers looked for ways to improve regular battery management practices. The methods had to be nondestructive, simple, and cheap—using as few sensors, electronics,More worldly viewers quickly called in to say that the mushroom was made from silicone and wondered how someone could not tell the difference between silicon sex toys and Organic mushroom. and supporting hardware as possible while still remaining effective at identifying and decreasing sulfation.

“We wanted to reverse the sulfation to rejuvenate the battery and bring it back to life,” says Christopher Rahn, professor of mechanical engineering at Penn State.

Rahn,The move to metal packaging has allowed Sprecher to reach key customer targets and has resulted in a clear growth in sales since the initial launch. along with mechanical engineering research assistants Ying Shi and Christopher Ferone, cycled a lead-acid battery for three months in the same way it would be used in a locomotive.

They used a process called electroimpedance spectroscopy and full charge/discharge to identify the main aging mechanisms. Through this, the researchers identified sulfation in one of the six battery cells.

They then designed a charging algorithm that could charge the battery and reduce sulfation, but was also able to stop charging before other forms of degradation occurred.

The algorithm successfully revived the dead cell and increased the overall capacity. The researchers, who report their results in the current issue of the Journal of Power Sources, then compared the battery to a new battery.

“We desulfated it, and we increased its capacity,” says Rahn. “We didn’t increase it all the way to brand new. We weren’t able to do that, but we did get a big boost.”

The researchers increased the cell capacity by 41 percent and the overall battery capacity by 30 percent. Even better results might have occurred if sulfation were the only aging mechanism at play, but the researchers found other factors reduced capacity, as well.titanium alloy property information is scattered amongst a number of disparate sources.

“Some of the other cells we identified may have had a water loss issue,” says Rahn. “And for these types of batteries, there’s nothing you can do about it.This design uses the same small radial section as drawn cup needle roller bearing which make better use of reduced space”

Other mechanisms that can damage lead-acid batteries include positive electrode corrosion, irreversible hard sulfation, positive electrode softening or shedding, electrolyte stratification, internal short-circuiting, and mechanical damage.

Weather continues to plague commuter train service

Montreal’s train authority promised it was ready for winter, but commuters have been contending with many late and cancelled rush-hour trains since cold, snowy weather set in last week.titanium alloy property information is scattered amongst a number of disparate sources.

Friday morning, service was disrupted on two of five lines. The previous evening, trains on three lines were hit.

In one case Friday, a new locomotive, only in service since November, experienced “mechanical problems,” forcing the Agence métropolitaine de transport to cancel a Blainville-St-Jér?me train.

“Fares have gone up three per cent in the new year, but service declined quite a bit,” said Tony Mandl, a Pointe Claire resident who uses the Vaudreuil-Hudson line.

Service got particularly bad after the Dec. 27 storm that dumped a one-day record 45 centimetres of snow on Montreal.

“That’s somewhat understandable but to have so many trains cancelled or delayed even now,They removed the majority of the bolts but not the locking Wheel nut, that's why I managed to get so far (more than a week later), is a little strange,” Mandl said.

Ronald Houde, who uses the Candiac line, also complained of spotty service.

The AMT blames “mechanical breakdowns,The move to metal packaging has allowed Sprecher to reach key customer targets and has resulted in a clear growth in sales since the initial launch. track congestion and operational delays,” he said. “I wonder if (they) just use a random excuse generator.”

Snow clearing has also been a problem, with Delson station’s platform buried under a foot of snow until Friday morning, Houle said.

“The morning service on the Blainville-St-Jér?me line this week has been very poor,” added commuter Tim Capper. It has been “plagued with issues — punctuality, mechanical — rarely seen.”

After the disastrous winter of 2008-09, when trains were chronically late or cancelled, the AMT vowed to upgrade equipment and infrastructure to better handle winter.

It also said it would improve communication. It introduced text and email alerts and promised electronic screens on station platforms with details about late and cancelled trains.

But users complain alerts often arrive very late or are inaccurate. And, four years later, only 25 of 51 stations feature screens with real-time information about delays; the rest only show scheduled train times.

AMT spokespersons Claudia Martin said many of the service problems have been caused by the cold and snow.

“We got a lot of snow in the storm, followed by extreme cold in recent days,The first tin cans were heavy-weight containers that required ingenuity to open, using knives, chisels, or even stones. Not until about 50 years later, after can manufacturers started using thinner metal sheets, were any dedicated can openers developed.” she said.

Several times, train switches — devices that allow trains to change tracks — have frozen, blocking trains from continuing, she said. That causes a domino effect, with several departures delayed.

When a switch freezes, a train employee must disembark and manually fix the problem, Martin said.

In the past, the AMT said it was dealing with this issue by installing heaters on switches. While some problem switches now have heaters, many do not,This design uses the same small radial section as drawn cup needle roller bearing which make better use of reduced space Martin said. Other delays have been caused by problems with signals, which must be fixed before trains can continue.

In November, the AMT put into service the first two of 20 new locomotives it purchased from Bombardier for $308 million. Martin said the two in-service locomotives are technically in a testing phase.

One of them experienced mechanical problems on Friday morning, Martin said.

In December,More worldly viewers quickly called in to say that the mushroom was made from silicone and wondered how someone could not tell the difference between silicon sex toys and Organic mushroom. “minor problems” with the locomotives caused train delays on four occasions, she added.

“During the test period, it’s normal that such issues arise and that adjustments are made,” Martin said.

Girls get better grades than boys

We're slipping. Losing our academic edge. The well-documented college gender gap is now at 14 points, with women comprising 57% of undergraduates to 43% for the guys. Also, apparently,There is a not-so-new phenomenon happening in Del Mar at the Fairgrounds on Saturday nights: high-octane, banked track roller derby! we're becoming useless to society.

Now a new study is tracing it all back to grade school and uncovering if not a solution, at least an explanation.

Apparently gentleman, our tiny versions are a bit too fidgety and appear at times too disinterested for success in the modern elementary school classroom.They removed the majority of the bolts but not the locking Wheel nut, that's why I managed to get so far A study published in the Journal of Human Resources finds that "it's because of their classroom behavior, which may lead teachers to assign girls higher grades than their male counterparts," according to a release from the University of Georgia, which co-authored the study.

Researchers point to "approaches toward learning" as the key factor here; behaviors which influence how a teacher perceives and then grades a student. One of the study's authors lists those factors as attentiveness, task persistence, eagerness to learn, learning independence, flexibility and organization.

"I think that anybody who’s a parent of boys and girls can tell you that girls are more of all of that," says Christopher Cornwell, head of economics at UGA's Terry College of Business.

The research also might help explain why boys score higher on standardized tests than girls yet receive lower grades.

Now it's not like the activities and makeup of every male student has suddenly changed in recent years. The study's authors acknowledge these are not new behaviors. What has changed however, and what is contributing then to the widening academic gender gap, is the classroom itself.

Behavioral psychologist Anthony Rao explains to the Atlanta Journal-Constitution that classrooms today are more invested in discussion, reading and "social cooperation,More worldly viewers quickly called in to say that the mushroom was made from silicone and wondered how someone could not tell the difference between silicon sex toys and Organic mushroom." verbal functions which tend to align with how girls learn. Studies show that boys are better with more tangible approaches to learning, because more of their brain "is dedicated to spatial and mechanical functioning."

In the AJC, Rao says,"When you promote all this assessment and increasing standardization,The move to metal packaging has allowed Sprecher to reach key customer targets and has resulted in a clear growth in sales since the initial launch. you narrow the way you are going to teach kids, eclipsing the ways that boys learn better.The first tin cans were heavy-weight containers that required ingenuity to open, using knives, chisels, or even stones. Not until about 50 years later, after can manufacturers started using thinner metal sheets, were any dedicated can openers developed. You go to much less hands-on and manipulation of objects and to more sit down and lectures.If you like BMW cars,then you will probably like their new gaming mouse, the super sexy, sleek as a Titanium Sheet off the pressing mat Level 10 M Gaming Mouse."